iptv.online online телевидение

kamertonvv

Новичок
Подскажите где ещё копать?
Ни как не могу выставить время на прошивке от Небула.
Выставляю +5 в часовых поясах, время уходит на час назад от настоящего, выставляю +6 уходит на час вперёд!
Загадка!?
может где то нужно ещё чего поставить, не могу больше ничегос вязанного со временем найти!
За ранее благодарю!
 

папараци

это имя знают все ...
Команда форума
kamertonvv, какие спутники смотришь?На ямале 90* есть такое дело что часы не перевели при просмотре с него время и уходит на час вперёд.
 

kamertonvv

Новичок
папараци,
В подписи указано 36е.
На втором ресивере AzboxHD проблем нет, как шли часики так и идут.
А тут какая то котовасия получается. Нет возможности выставить правильно или на час вперёд или на час назад. среднего нет....
 

market223

Супер-Модератор
Команда форума
kamertonvv, попробуйте в блю-панели корректировку времени.
 

kamertonvv

Новичок
В Блю панели корректировки времени не нашёл, зато решилось все просто!
Как всегда сыграла магия - в настройках ставил +6 алмата, время уходило на час вперёд, поставил +6 Астана и время встало на своё место.
Странно, но это помогло!
Сравнил настройки часовых поясов и не думал что такое возможно!
 

micvol

Новичок
Сори за ламерский вопрос но эти имиджи "Support receiver: Golden Media 990 CR HD" подходят на Gi 8120
 

sidorov

Новичок
Работает хорошо, а если поставите мои переводы на русский, будет еще лучше и проще.
Это общий перевод: http://multi-up.com/667788
А это плагин PKT: http://multi-up.com/667792
Если что еще надо-стучите!
Подскажите в какие папки прописывать файлы,сам не розберусь.
 

levalex

Новичок
под GI 8120 перепробовал все предложенные фаилы для пульта но так и не запустил,есть 100% рабочие?
 

solg

Профи в Сат-ТВ
Enigma2 OpenSource SH4 Duckbox Project GIT-3052 PKT SVN-1266 HAARP v3a Image
Основные функции, которые были протестированы и прекрасно функционирует:
Standby, Deep Standby, записи, медиа-плеер, жесткий диск, WiFi и т.д.
Mgcamd работает просто супер
Графическое изаброжение Blue Panel
Media Player обыгрывает все форматы
Запись и Timeshift работает без проблем
Жесткий диск в формате ext3 и WLAN через HUB опрeделяются без проблем после deep standby
 

Вложения

uu4jgr

Новичок
после установки enigma2 через USB ,вроде все прошло нормально но при запуске пишет Load и все тишина ! что делать ?
 

market223

Супер-Модератор
Команда форума
Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1840 NEBULA v3 Image

Support receiver: GM990
Kernel stm24-211


Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie


Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability


Special THX to TDT


FTP login: root, passwd: pkteam

http://www.sendspace.com/file/tn9md4
 

mark2105

Новичок
Подскажите, пож-та, какая Энигма2 корректно работает с ГИС-8120 с новым пультом, без косяков?
 

solg

Профи в Сат-ТВ
Подскажите, пож-та, какая Энигма2 корректно работает с ГИС-8120 с новым пультом, без косяков?
HDMU_1301_E2_spark_211_git_4848_nodebug_nolcd_Diff3_ffm_Flash
говорят работает хорошо и картинка хорошая , А вообще то нужно подбирать под себя кому что нравится
 

jitar

Пользователь
PKT SVN1840 - замечательный имидж, единственно что то WI-FI не подключился, адаптер TP-Link 321 не определился (на прошлой PKT работал)
 

market223

Супер-Модератор
Команда форума
PKT GM7162 TRIPLEX NEBULA v3 image

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1840 NEBULA v3 Image

Support receiver: GM7162
Kernel stm24-211


Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie


Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability


Special THX to TDT


FTP login: root, passwd: pkteam

updated to SVN-1852

http://fs02n4.sendspace.com/dl/38b0...m7162_GIT-4513_PKT-1852-NP_stm24-p0211.tar.gz
 
Сверху