seal

Администраторы
Команда форума







The Openbox S9 HD PVR C/Ku FTA Receiver.

The lowest priced High Definition (HD) Receiver on the market today.
Replaces the Solomend 800 HD.
The Openbox is fully DVB-S/DVB-S2, MPEG-2/MPEG4 compliant, and features quick and accurate hardware-driven Blind Scan and AC3 audio.
The Openbox S9 HD is also PVR ready to record your favorite programs or for time-shifting*. (*external hard drive required, not included.) Ships with a power supply for use in the USA or for Europe. New and Improved




OPENBOX S9 HD PVR receiver main features
This receiver has all the functions of dreambox ; It is the cheapest HD receiver; Can be used around the world;
Linux Operative System ; HD CPU;Available tuners: DVB-S2;
Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable--and Language can be increased in the future
OPENBOX S9 HD PVR receiver General Specifications:

*Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
*Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4 (does not support 4:2:2 video)
*Digital Video Recorder through USB (external flash or hard drive not included)
*Worldwide compatible
*Hardware Blind Search DVB-S and DVB-S2
*STB main IC solution is ALI , demodulator model is M3501 from Ali
*HD DVB-S2 SHARP 7306 Tuner
*Multilingual support on screen menu (OSD):
*300 MHz MIPS Processor - Linux OS
*Chipset: Ali3602
*Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
*Fully compliant MPEG-2 MP@HL & MP@ML;
*Fully compliant MPEG-1 Layer I & II & III,
*Dolby Digital Audio(AC3)
*SCPC & MCPC receivable from C/Ku band satellites
*Multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable)
*Motor Support: DiSEqC 1.2/1.3 (USALS - GoTo X)
*HDMI 1.3 output (HDMI cable not included)
*PVR (store on USB external disk)
*Multimedia files playback (by USB);
*7 Days Electronic Program Guide (EPG)
*Teletext and subtitle out through OSD
*Multi-lingual DVB subtitle and teletext
*Automatic and Manual Channel Scan, Automatic Service Scan
*NIT search, Hardware BLIND SEARCH
*Fast channel switching < 1 second
*OSD in many languages and skin-support
*Multilingual support on screen menu (OSD)
*Multiple display mode: 1080i/720p/570p/576i/480p;
*Videotext Decoder
*Analog RCA audio output: stereo (L+R);
*Digital audio output: S/PDIF by coaxial
*S/PDIF Interface for digital bit stream out (AC-3)
*YCbCr Component Video Output
*2 x Scart (RGB, FBAS or S-Video)
*Screen format: Auto, 4:3, and 16:9;
*Upgrade software through USB2.0 port
*Powerful user interface program management function, parent lock
*1x CI built-in
*1x CA (smartcard reader) built-in
*10/100Mbit Ethernet Interface
*US or Europe Power Cord (please specify when ordering)


DVB-S2
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75
LNB Power: Auto/14v/18v/OFF, Imax = 500mA

Video decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output digital
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Video parameter
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart
Output: FBAS, RGB, S-Video
Serielle Interface RS 232
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet
10/100 MBit compatible interface
Function: Update of Firmware

USB
1 x USB 2.0 Host ,PVR
LNB power and polarisation per tuner
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17.3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
External PSU
Input:110-240V AC / 50-60Hz / 0.6A
Output: 12V = / 3,0A

Physical specification
Ambient Temperature +15°C ~ +35°C
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1,8 kg?without HDD

Power
AC input range:100-240VAC 50/60Hz
PowerConsumption (Standby): Max. 10W (<1W)
 

seal

Администраторы
Команда форума
or those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines.

First download the attached test cccam.cfg file at the bottom of this page.
Once unzipped open the file and overwrite the test clines with your own active clines, then save the changes.

Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is.
Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver.

Now goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button.



Now select Update Files by USB and click the OK button.



Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.



If there is no tick displayed, select CCcam,cfg [CCcam Plug] and click the OK button.



Once the tick is displayed, click the Yellow button.
Now select CCcam Plug Setting and click the OK button.



Now select option 1 .. CCcam.cfg and click the OK button.



Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated.



Finally check your Network Settings are configured correctly.



If your router supports DHCP turn it ON and click Apply.
If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly.



Now reboot your receiver, and if all is okay, you may start viewing channels.
 
Последнее редактирование:

seal

Администраторы
Команда форума
OpenBox S9 Modified Dump.file with Channel List [13 November 2010]

This is a modified Dump file, and was released on [13 November 2010]
This dump file is based on the the latest official firmware release
[HDS2-10-11-08:11007CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Includes in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated channel list:
All satellites updated.
Dish positioning problem corrected.
Many new channels added.
A number of channels updated with new settings.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a multi-sat coverage cline.
================================================== =================================

If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-

1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.

The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.

================================================== =================================
How to add the replace.list file.

Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug]
now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.

You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files.
Of course we are aware that some have the tendancy to remove or edit the text files, and I have no idea why.

DOWNLOAD
 

seal

Администраторы
Команда форума
New Official Firmware Released [HDS2-10-11-08:1100CMT]

What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for Irdeto based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.

And entering BISS Keys will still achieve nothing, which is a shame.

I have also noticed, that the modified date of this official release is, '‎01 ‎January ‎2008, ‏‎01:28:58' which seems rather odd ?.


================================================== ================


This is a modified Dump file and was released on [09 November 2010]
This dump file is based on the the latest firmware release [HDS2-10-11-08:11007CMT]

Included is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Includes replace.list [German HD Channels okay on Astra]

=======================
What's New:
Updated channel list:
New channels added 13 east AXN Sci Fi, Fox +2, Fox Life +2, Fox Crime +2 etc
New settings added for 13 east Hallmark, CN, Music Box etc
New settings added for 28.2 east Sky Premiere, Sky Thriller etc
New channels added 28.2 east ITV3 HD, ITV4 HD etc
and also included 0n 28.2 east are a number of Asian Channels, such as Zee, Sony, B4U etc
=======================

If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-

1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit any of the files included in any way, or add any other extra files.
Of course we are aware that some have the tendancy to remove the text files, and I have no idea why.

All the best
Laurals.

File Name: HDS2_SCMT_Eur.zip

File Name: HDS2_DUMP.zip
 

LuckyManX

Профи в Сат-ТВ
смотрю название топика - с9...
смотрю сюда тоже с9...
дальше непонятки... ну то что внешний вид чуть отличается - это ладно...
но вот тут однотюнерный вариант с9... а там двухтюнерный....
это такие метаморфозы... или это разные аппараты?
:unsure:
 

Varvar

Любитель Сат-ТВ
за 108$ с доставкой на дом. бесстыдно низкая цена!
он вроде бы идентичен Solomend 800 HD PVR (только ориентирован на европу, а не китай), а по нему есть неплохие отзывы.

такое нешел на одном из форумов...........кто что знает отпишитесь.....или это" утка"



а вот и интерНЕТ магазин http://www.crown-sat.com/openbox-s9-hd-pvr.html
и цена 120 у.е.
 
Последнее редактирование:

dkh1969

Новичок
SSHD ДЛЯ КИТАЙЦА Openbox S9 HD PVR

Приехал ко мне этот китаец, все работает, единственный трабл - отсутствие ssh smb, ну и тд. и тп. а хотелось бы. кто знает где взять или как сделать такую прошивку?
 

Toktasyn

Новичок
здравствуйте ув. форумчане ! для просмотра каналов через шару на опенбокс s9(китаец) где скачать прошивку для стабильной работы ? заране благадарюю.
 

Axay

Новичок
Фигня полная. HDMI плохой контакт. Biss не работал. viasat по шарингу работал, а вот платформа HD нет. после первой перепрошивки гавкнул. А еще когда флешку вставляеш страшно тормозит. вывод - деньги фыброшенные на ветер :nono:
 

копчик

Новичок
OPENBOX s9 китайский

Здраствуйте ! У меня такая проблема с OPENBOX s9 китайский немогу через Total Commander зайти на FTp в ресивер , может кто знает как ??? Весь инет облазил не чего не нашел (( Зарания спасибо за ответ !
 

Vilen1

Новичок
Здраствуйте ! У меня такая проблема с OPENBOX s9 китайский немогу через Total Commander зайти на FTp в ресивер , может кто знает как ??? Весь инет облазил не чего не нашел (( Зарания спасибо за ответ !

На него не зайдешь по ФТП, да и не нужно! Достаточно все листы заливать с флехи - и БИССЫ и прочие ключи...
 

michej

Новичок
Iswinite no shto mne nado ismenitj w CCcam.cfg? ja skachal ee i otkril s editor. kakie danie sanositj? nado mne newcamdlist toshe senesti w resiwer?
 

michej

Новичок
Cardsharing na Openbox S9

rivet wsem.

Iswinite no mogu pisatj toljko latinskimi bukwami.

Ja ushe nedelju muchajusj s kitajskim resiwerom Openbox S9.
Chochu sdelatj na nego Sharu s Sky Deutschland no ne wihodit.

na nego neljsa saiti cheres FTP. Moshno toljko sagrusitj cheres USB. Ja sagrusil Newcamlist. Poluchilosj a sagrusitj CCcam i Mg cam newihodit.

Ili moshet ich ne nado? Moshet moshno toljko CCcam sagrusitj i hwataet? Mne nado shto menjatj w CCcam esli ja cheres Editor ee otkroju?

mne shelateljno podrobnoe opisanie w kartinkach. Ja w etom dele nowenjkij.
 

evtushok

Новичок
Агде их взять, подскажи?
Спасибо
1. Для начала глянь этот форум.... я там кое что писал
http://www.wizardfox.net/openbox-567/openbox-s9-23383/index84.html#post355948
2. Есть люди, обладающие умением убить (причем не раздумывая и сразу любой ресивер)..... я бы им не верил. Китаец достойный - поверь. (особенно за эти деньги)
 
Сверху