Новое ПО на основе прошивок от DGS

K

karea

Профи в Сат-ТВ
SifTeam-0.5.2-r13366 BlueMoon (FLASH-USB)

ph_or_55321_650ac4c.jpg


With the last image was an issue of 'compatibility' with the skin bluemoon
For the record ... when you try to read news via RSS-NEWS decoder was in panic, while the default skin is not the problem it is.
Well ... I have solved the problem of panic with rss-news now and then the skin is used BlueMoon
I have created, and then, a new version based on 9000HD 'last published by ngc1927 r13366 (which of course thank you)
These additional features:
· Default skin bluemoon
· New splash-screen (custom SifTeam ... done in 5 minutes, but I hope both of vs. Rating)
· Acting on default image I added the script and format_pendrive_sdb1_2_3_4 show_multiboot

This is the new splash screen that appears when loading the firmware

9000hd FLASH-VERSION

http://www.mediafire.com/?naqmb0by64cwr66

9000hd USB-VERSION

http://www.mediafire.com/?y7d9d3nyv63dofy

thanks to Spippolo !good!
 
Lenina

Lenina

Куратор "IPBox"
SifTeam-0.5.2-r13366 BlueMoon Rev.3

Nuova versione della r13366 con skin bluemoon
Risolto il problema del panic con il menu IMPOSTAZIONE-ORARIO
Per quanto riguarda la skin...non ho riscontrato nessun altro problema

Download Flash-Version
9000HD
http://www.mediafire.com/download.php?0n8bhmzg2s568c3

910HD
http://www.mediafire.com/download.php?jc7bdbiv91bksgs

Инфо отсюда http://forum.sifteam.eu/ipbox-9000-...22-sifteam-0-5-2-r13366-bluemoon-rev-3-a.html

Добавлено через 4 часа 36 минут
P.S. Там же добавлены для остальных моделей из линейки и выложены USB версии
 
Последнее редактирование:
Lenina

Lenina

Куратор "IPBox"
Cuberevo Series 1.0.(r13433) version

DB version : r13226


Caution)

1. You had better backup the channel list using PC Editor before downloading the new images.

2. If your STB db version is an older version, you should download the image with usb_db.img like usb_kernel_root_db.img usb_nobbot.img.

If your STB db version is the same version, you can download the image without db.img like usb_kernel_root.img.

3. If AC power is unstable or disconnected while image downloading, pictures may not appear on the screen properly. In that case, you should make USB download mode once more and perform downloading the image again.

4. Please read the README file carefully before you start downloading.

This README is for CubeRevo HD model series.
This document was approved on 3/November/2010 by the Cuberevo-Digital.

Cuberevo-digital release r13433: ( 3/November/2010)
--------------------------------------------------------------
1. Fix - PIP doesn't work
2. Fix - unicable doesn't work and save
3. Fix - panic on media player
4. Fix - TZ is applied every times on Timesetting Menu.
5. Add nonstandard_encoding tp(eutelsat w3a/10844/H)

Caution
1. Back up your data of HDD except the version of r12947 software in your box
At first, you have to back up recorded file or photo, mp3 data from STB
before downloading this image if you need. This image is supported to something
different file format or data format compare with previous software image.
2. Format HDD except the version of r12947 software in your box
You should be format HDD after downloading completed this new image,
otherwise, it will be possible to malfunction about PVR, timeshift, mp3,photo album and so on

Note.
1. Prohibited to recording, and PIP function in Server box when Multiroom Service or Streaming Player is running.
and The boxes should have same FTP user ID/Password with server box and client box when you use Multiroom service function

2. ext3 file system is slower than ext2 normally.
If you will record two HD channels with ext3 at the same time, it may fail in record.

we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

http://www.cuberevo.com/


if you want multiboot function, download attached multiboot-XXXX.img.
Then press number button which you want on RCU when start up from shutdown.
Multiboot function supports as below style.

# 1 boot with CDKroot(NFS)
# 2 boot from USB memory stick, with internal HDD
# 3 original images as current flash memory
# 4 boot with NFS
# 5 boot from USB memory stick, but without internal HDD
# 6 boot from internal SATA HDD
# 7 boot from flash memory for another image

Default value : no.3
 
Последнее редактирование:
Lenina

Lenina

Куратор "IPBox"
Vodka v.0.0.9 Image for Ipbox 9xxx

Features
========
- Based on r13469
- Newcs 1.67, mgcamd-1.35 and Incubuscamd 1.21 are installed
- default PIN : 1111

Configuration
=============
configurations as below.

/var/keys : config data as newcamd.list newcs.xml incubusCamd.conf
/var/bin : excution files as incubusCamd, mgcamd, newcs

9000 http://uploading.com/files/12ac6d98/vodka_009_r13469_cuberevo_usb_all_noboot.rar/

900 http://uploading.com/files/87a9m413/vodka_009_r13469_mini_usb_all_noboot.rar/

910 http://uploading.com/files/85d8fm79/vodka_009_r13469_3000HD_usb_all_noboot.rar/
 
yakimoto

yakimoto

Любитель Сат-ТВ
А существует в природе имидж для IPBOX 900HD DGS 12413? Если да, то где его взять?
 
janigor

janigor

Супер-Модератор
Команда форума
yakimoto написал(а):
А существует в природе имидж для IPBOX 900HD DGS 12413? Если да, то где его взять?
Нажмите для раскрытия...

Например здесь:
Скрытое содержимое доступно для зарегистрированных пользователей!
 
Lenina

Lenina

Куратор "IPBox"
24.11.2010 г. на сайте http://www.satupdate.net/novinky.html выложен плагин SkyLink ICE card for AB IPBox 9xxxHD со следующим описанием:

Detaily súboru
AB IPBox HD/Plugins Patches/SkyLink ICE card for AB IPBox 9xxxHD.zip


Popis súboru


Postup, ako sprevádzkovať novú Skylink ICE kartu na
AB IPBox 9000HD, 900HD, 910HD, 91HD s EMU OSCAM

Testované na image Vodka 0.0.7 based 13322. Podporuje iba Skylink kary Cryptoworks a karty ICE so simulcryptom. Karty IRDETO niesú podporované.



1, Zo sekcie download stiahnúť a nainštalovať do prijímača NG Vodka 0.0.7 software.
2, Z priloženého archívu nakopírovať obsah priečinkov do príslušných priečinkov cez ftp do prijímača.
3, Po nakopírovaní zmeniť atribúty každého súboru na 777.
4, Po nabootovaní prijímača kombináciou červeného alebo zeleného tlačítka spustiť OSCAM
(na obrazovke sa zobrazí hláška "OSCAM started")
5, Po chvíli by mala karta začať dekódovať
6, Nastavenia uložíme vypnutím prijímača.
7, Po zapnutí by mala karta dekódovať.

Может быть кто-нибудь переведет дословно?

P.S. Поставил отсюда http://forum.sifteam.eu/ipbox-9000-900-hd-cuberevo-mini/84795-sif-dgs-0-6-0-13433-darkgreen.html посмотреть на флешку Sif-Dgs-0.6.0-13433-DarkGreen и заменил url2 , а эмулей нет... Может кто подскажет действующий url2?

Еще раз P.S. Эмуль поставил, как дядя Федор учил ставить на DGS, заработало.
 
Последнее редактирование:
janigor

janigor

Супер-Модератор
Команда форума
Lenina написал(а):
Detaily súboru
AB IPBox HD/Plugins Patches/SkyLink ICE card for AB IPBox 9xxxHD.zip
Popis súboru
Postup, ako sprevádzkovať novú Skylink ICE kartu na
AB IPBox 9000HD, 900HD, 910HD, 91HD s EMU OSCAM
Testované na image Vodka 0.0.7 based 13322. Podporuje iba Skylink kary Cryptoworks a karty ICE so simulcryptom. Karty IRDETO niesú podporované.
1, Zo sekcie download stiahnúť a nainštalovať do prijímača NG Vodka 0.0.7 software.
2, Z priloženého archívu nakopírovať obsah priečinkov do príslušných priečinkov cez ftp do prijímača.
3, Po nakopírovaní zmeniť atribúty každého súboru na 777.
4, Po nabootovaní prijímača kombináciou červeného alebo zeleného tlačítka spustiť OSCAM
(na obrazovke sa zobrazí hláška "OSCAM started")
5, Po chvíli by mala karta začať dekódovať
6, Nastavenia uložíme vypnutím prijímača.
7, Po zapnutí by mala karta dekódovať.
Нажмите для раскрытия...

Данные о файле
AB IPBox HD/Plugins Patches/SkyLink ICE card for AB IPBox 9xxxHD.zip
Описание файла
Шаги, по запуску новой карты Skylink ICE на
AB IPBox 9000HD, 900HD, 910HD, 91HD с EMU OSCAM
Протестировано на имидже Vodka 0.0.7 based 13322. Поддержка только Skylink карты Cryptoworks и карты ICE с симулкриптом. Карты IRDETO не поддерживает.
1, Из секции download загрузить и установить в ресивер софт NG Vodka 0.0.7.
2, Из прилагаемого архива скопировать содержимое каталогов в соответствующие каталоги по ftp в ресивер.
3, После копирования изменить атрибуты всех скопированных файлов на 777.
4, После загрузки ресивера при помощи красной или зеленой кнопки запустить OSCAM
(на экране отобразится сообщение "OSCAM started")
5, Карта должна после этого декодировать каналы
6, Настройки запомним, выключив ресивер.
7, При следующем включении карта должна раскодировать каналы.
 
Последнее редактирование:
kasvit

kasvit

Профи в Сат-ТВ

Вложения

  • windows-1251__url2-sifteam(DGS).rar
    445 байт · Просмотры: 51
W

wsnake

Пользователь
подскажите плиз пароль на вебинтерфейс Vodka v.0.0.9 Image for Ipbox 9xxx и еще : есть ли какой то плагин\скрипт чтоб изменять zoom как в PGI (как прикрутить? )
 
Lenina

Lenina

Куратор "IPBox"
Вот еще, кому охота повозиться, такая штука есть (выложена 09-12-2010, 17:36) здесь: http://forum.sifteam.eu/ipbox-9000-...1-r13433-epgready-aggiorna-lepg-crossepg.html

r13433-EpgReady (aggiorna l'epg senza crossepg)

Анонс в оригинале (для себя переводить даже не пытался, т.к. пока установил PGI-073, и буду ждать новую PGI):

Questa immagine é predisposta per aggiornare l'EPG INTERNO (quello che appare premendo il tasto EPG) per SKY MEDIASET TIVUSAT

CROSSEPG NON DOVREBBE ESSERE PIU' INDISPENSABILE
Potete anche non installarlo, ma se volete continuare ad usarlo.. l'unica accortezza da avere é disabilitare il sync al boot

Dopo aver installato e configurato l'immagine...
se premete verde appare il sif panel 0.6.1 (grazie ngc1927) dove ho aggiunto la voce EPG-download
Premendo il tasto 9 inizia il download della guida.
L'EPG si può scaricare in qualsiasi momento.. non é necessario il cambio canale e richiede poco tempo
Un messaggio a video avverte che il download é iniziato e dopo circa 10/20 secondi apparirà un altro messaggio per avvisare che il download della guida é terminato
Dopo il download per aver disponibile la nuova EPG é necessario il riavvio del decoder
E' possibile automatizzare il download tramite crontab che é già preinstallato (all'interno trovate la riga da decommentare per schedulare il download alle 4 del mattino)

IMPORTANTE:
Per un corretto funzionamento...L'hdd deve essere partizionato con le classiche 2 partizioni:
SDA1 linux swap (che verrà attivata automaticamente, é importante perché all'avvio il decoder bufferizza l'intera guida)
SDA2 linux standard (per le registrazioni)

Altre caratteristiche:
skin dark-green
Deafult multiboot :
Tasto 0 - DGS-FLASH
Tasto 1 - ENIGMA SDB1
Tasto 2 - ENIGMA SDB2
Tasto 3 - ENIGMA SDB3
Tasto 4 - ENIGMA SDB4
Tasto 5 - DGS-SDB1
Tasto 6 - DGS-SDB2
Tasto 7 - DGS-SDB3
Tasto 8 - DGS-SDB4
Tasto 9 - ENIGMA FLASH

Penso di aver migliorato la stabilità dell'immagine disabilitando alcuni servzi che partivano all'avvio (samba per esempio).Si possono comunque ripristinare con VERDE/MENU
Comunque... é la mia prima versione EpgReady e quindi per capire se funge davvero..dobbiamo aspettare un po' di riscontri sperando che siano positivi

Grazie a tutti e buon flash

IPbox 9000 HD - r13433-9000-EpgReady http://www.sifteam.eu/download/deco.../ipbox-9000-hd/5468-r13433-9000-epgready.html

IPbox 9000 HD - r13433-9000-EpgReady-UsbVersion http://www.sifteam.eu/download/deco...-hd/5469-r13433-9000-epgready-usbversion.html

IPbox 910 HD - r13433-910-EpgReady http://www.sifteam.eu/download/decoder/ipbox/ipbox-910-hd/ipbox-910-hd/5470-r13433-910-epgready.html


IPbox 910 HD - r13433-910-EpgReady-UsbVersion http://www.sifteam.eu/download/deco...0-hd/5471-r13433-910-epgready-usbversion.html

IPbox 900 HD - r13433-900-EpgReady http://www.sifteam.eu/download/decoder/ipbox/ipbox-900-hd/ipbox-900-hd/5472-r13433-900-epgready.html

IPbox 900 HD - r13433-900-EpgReady-UsbVersion http://www.sifteam.eu/download/deco...0-hd/5473-r13433-900-epgready-usbversion.html

IPbox 91 HD - r13433-91-EpgReady http://www.sifteam.eu/download/decoder/ipbox/ipbox-91-hd/ipbox-91-hd/5474-r13433-91-epgready.html

IPbox 91 HD - r13433-91-EpgReady-UsbVersion http://www.sifteam.eu/download/deco...91-hd/5475-r13433-91-epgready-usbversion.html
 
Последнее редактирование:
L

Lowik

Профи в Сат-ТВ
Последнее редактирование:
Lenina

Lenina

Куратор "IPBox"
New Vodka v.0.0.10 For Cuberevo (9000HD)

Based on r13554
--------------------------------------------------------------
1. Update tpinfos of EUTELSAT W3A(7.0E), ARABSAT 2B(30.5E), TURKSAT 1C, 2A(42.0E)
2. Fix youtube doesn't work.
3. Fix N-Radio doesn't work.


Caution
1. Back up your data of HDD except the version of r12947 software in your box
At first, you have to back up recorded file or photo, mp3 data from STB
before downloading this image if you need. This image is supported to something
different file format or data format compare with previous software image.
2. Format HDD except the version of r12947 software in your box
You should be format HDD after downloading completed this new image,
otherwise, it will be possible to malfunction about PVR, timeshift, mp3,photo album and so on

Note.
1. Prohibited to recording, and PIP function in Server box when Multiroom Service or Streaming Player is running.
and The boxes should have same FTP user ID/Password with server box and client box when you use Multiroom service function

2. ext3 file system is slower than ext2 normally.
If you will record two HD channels with ext3 at the same time, it may fail in record.

we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

http://www.sat-universe.com/redirec...5d8d7/Vodka20V.0.0.1020for20Cuberevo.rar.html

Информация отсюда http://www.sat-universe.com/showthread.php?t=197222
Там же должны позже выкладывать и на другие модели.
 
Lenina

Lenina

Куратор "IPBox"
BMT 0.99 YETI based on CRi 13554

http://www.sat-universe.com/redirec...ost.org/file/17/bmt-yeti-cuberevo-tar-gz.html

This is (c) 2011 by BMTeam. All rights reserved.
BMT 0.99 YETI based on CRi 13554
Prepared by: BMTeam
Release date: January 14, 2011
Tested on CUBEREVO, IPBOX 9000
Contact us: [email protected]

BMTEAM IS NOT RESPONSIBLE FOR ANY DAMAGES OR HARMS CAUSED BY INSTALLATION AND OPERATION OF THIS SOFTWARE
WATCHING A PAY TV WITHOUT PAYING CORRESPONDING ABONENT FEES IS ILLEGAL AND WILL BE PUNISHED ACCORDING THE LAWS.
BY INSTALLING AND USING THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.

-------------------------BMT features-------------------------------
- BlueMoon as default skin
- oscam as cardserver included (as default)
- newcs, mgcamd, incubus, gbox, mbox included (default configs)
- jaro channel list as default channel list
- IrK multiboot included as separate file
- priority for CYFRA+ set
- busybox 1.18.1 included
- pl2303 driver included
- bitrate plugin, HDD temp plugin
- simple BMT emupanel included
- epg from ITI works properly

---------------------below is planned in future-----------------------
- BMT webif
- advanced BMT panel
- USB dvb-t card compatibility

-----------------------IrK multiboot 3.0 options----------------------


0 = DGS - FLASH
1 = E2 - USB SDA1
2 = E2 - USB SDA2
3 = DGS - HDD SDA3
4 = E2 - FLASH
5 = E2 - HDD SDA5
6 = E2 - HDD SDA6
7 = DGS - USB SDA1
8 = E2 - USB SDB1
9 = DGS - USB SDB1


-------------------------------Thanks-------------------------------
- to all BlueMoon Team
- to all who help us to improve this image especially to (in alphabetical order):aftermath, genie, henia888, irk, jaro, kazetka7, kucykspeedway, otheitis, przemlulus, reaper7, schrederek, sorasil, walery.
 
Lenina

Lenina

Куратор "IPBox"
Здесь про эту прошивку есть анонсный ролик http://www.youtube.com/watch?v=5IyJTqPNnNI&feature=player_embedded#!

А вот здесь сайт разработчиков http://www.bmteam.pl/ . Там есть и для других моделей из линейки.
Я попробовал поставил на 9000. Инересна новая фича - эму=мэнеджер для предустановленных эмудяторов. Правда пока автоматом мжкамд у меня не стартует, приходится из этого менеджера запускать каждый раз после загрузки реса кнопкой пульта, а разбираться пока неохота. После нескольких перезагрузок начал запускаться автоматом.

P.S. Кому интересно версия для 9000 для USB http://www.mediafire.com/?px8tarr273l0743
 
Последнее редактирование:
Lenina

Lenina

Куратор "IPBox"
А вот здесь USB версии появились:

BMT 0.99 YETI Ipbox 9000HD Usb Version
http://download.bmteam.pl/incl/libf...TI-cuberevo-usbversion.tar.gz&action=download

BMT 0.99 YETI Ipbox900HD Usb Version
http://download.bmteam.pl/incl/libf...berevo-mini-usbversion.tar.gz&action=download

BMT 0.99 YETI Ipbox910HD Usb Version
http://download.bmteam.pl/incl/libf...berevo-3000-usbversion.tar.gz&action=download

BMT 0.99 YETI Ipbox91HD Usb Version
http://download.bmteam.pl/incl/libf...erevo-250hd-usbversion.tar.gz&action=download
 
Lenina

Lenina

Куратор "IPBox"
FMD 0.2 USB

Date: 09.01.2011
Name: FMD
Version: 0.2
Based on SIF/DGS R13559

***********************************************************
* Do NOT use other skins with this image
* USB version
* Only for Cuberevo 9000HD and OEMs
***********************************************************

* Modified layout of the infobox to display the short descritpions of the now and next event.

* A manually opened infobox now stays permanent open over channel changings made with the PG+/- key also with an opened extendend infobox. If channel change is done by numeric key input, the box closes again after the default time.

* New designed recorded media list with more informations.

* New designed scheduled recordings list with more informations.

* Replaced duration with end time for scheduled recordings. Can be found on the new designed scheduled recordings list, modification and creation of an entry and on the end time setting for running recordings which is called with the blue key.

* Added the TSIDs 8 and 10 for correct encoding of the new channels:
Sky Cinema Hits HD, Sky Action HD, Sky Sport HD 2, History HD, NatGeo HD, Disney Cinemagic HD

* Fix of time and date strings for more equality.

* Fixed german translations and added missing.

http://www.megaupload.com/?d=7VU83D7H
 
Войдите или зарегистрируйтесь для ответа.
Сверху