А как установить?
OpenRSI-openpli
Я так и сделал. Сперва распаковал а потом файлик этот закинул.
А wicard 1.15 работает на этом имидже? Если работает, то где его взять?
Не работает мгкамд. Буду пробовать через телнет лог смотреть.
А wicard 1.15 работает на этом имидже? Если работает, то где его взять?
Парни подскажите. Стоит вот эта прошивка.
Не могу запустить mgcamd 1.35a. Менял значение B: { 06 } на B: { 00 } подставлял всякие цифры. Шара не запускается. Вообще, этот имидж работает с mgcamd??? Версию mgcamd 1.35a. скачал с фида. С плагинов. Так же ставил mgcamd 1.38с. Бесполезно. Что делать, помогите?
Тут инструкция как
Вот скрины, извини что долго делал.
Вложения
qantrom
Профи в Сат-ТВ
так и у тебя та же байда ,путь не прямой,а через медию
раньше HDD был прямой путь,минуя медию.
а у тебя пиконы показывают ?
у меня на инфобаре пишет что диска нет,хотя стоит 500 гиг и через медию его видно
не могу понять,как правильно прописать путь в энигме,чтоб его стало видно.
Вложения
Последнее редактирование:
я вроде писал как примантировать диск через DeviceManager даже в картинках
это обязательно сделать нужно через DeviceManager примантировать
вот сюда загляни ешё
http://wvclub.net/forum/index.php?topic=235.0
а если только пиконы интересует , то пропиши путь к usb в settings
примерно так , но я не пробовал
config.misc.picon=/media/usb/picon
а в каком бэкапе диск сразу подрубается ? дай ссылку
я посмотрю что я ложил в него
Если не трудно,закинь в инструкции, пусть легче найти
записал но со звуком проблемма , очень тихо стало после отправки
так что извиняйте
http://youtu.be/2wbMgPaccXE
а вот тут можно указать где лежат пиконы
Вложения
Последнее редактирование:
qantrom
Профи в Сат-ТВ
vadim72, так у меня в диспетчере устройств не видно диска,в этом проблема
не могу понять почему
когда ,через "жесткий диск! форматирую ,идёт инициализация диска,затем диск форматируется без проблем,но его всё одно не видно
прошивал заново и бекап ставил и не один раз
результат тот же,менял и жёсткий диск,ставил 2 новых на 200 гтг и терабайт,всё одно и то же
вот что видно по телнет_у
---------- Сообщение добавлено в 23:52 ---------- Предыдущее сообщение размещено в 22:54 ----------
да,флешку ,любых размеров,монтирует без проблем и сразу.
не могу понять почему
когда ,через "жесткий диск! форматирую ,идёт инициализация диска,затем диск форматируется без проблем,но его всё одно не видно
прошивал заново и бекап ставил и не один раз
результат тот же,менял и жёсткий диск,ставил 2 новых на 200 гтг и терабайт,всё одно и то же
вот что видно по телнет_у
Скрытое содержимое доступно для зарегистрированных пользователей!
---------- Сообщение добавлено в 23:52 ---------- Предыдущее сообщение размещено в 22:54 ----------
да,флешку ,любых размеров,монтирует без проблем и сразу.
Последнее редактирование:
Привет! Возникла следующая проблема- после установки имиджа ( ноябрь 2013 ) загружается бэкап , ставлю эмуляторы, трансмиссион , кеймап пингфлод, нстримвод. Всё работает , но при попытке выбрать канал кнопкой ок в меню каналов рес уходит в зелень, боковыми кнопками переключает без проблем. Кто знает где копать?
скинь crash.log если замена скина не помогла
Вот последний
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Втр Сен 23 18:05:07 2014</crashdate>
<compiledate>Sep 21 2013</compiledate>
<contactemail>forum at www.opensat4all.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2013-09-20</sourcedate>
<branch>(no branch)</branch>
<rev>2fe4ddc</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>premium</stbmodel>
<kernelversion>
<![CDATA[
Linux azboxhd 3.9.2-opensat #1 PREEMPT Wed Sep 18 18:38:26 CEST 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>mem=107m console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openrsi 3.0 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16352k video mem
- double buffering available!
9152kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7e2608 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Found 1 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 5201 services
scanning for frontends..
opening frontend 0
close frontend 0
boxtype detection via /proc/stb/info not possible... use fallback via demux count!
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 1
Use valid Linux Time
(RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk hdb -> /dev/hdb -> /dev/hdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/hdb')
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
SKIN ERROR: {hd_glass16/skin.xml}: primary skin not found. Please contact the skin's author!
defaulting to standard skin... PLi-HD/skin.xml
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: advanced
add 90 to 2
add 100 to 2
add 130 to 2
add 160 to 2
add 192 to 2
add 215 to 2
add 235 to 2
add 255 to 2
add 282 to 2
add 315 to 2
add 360 to 1
add 390 to 2
add 420 to 2
add 530 to 2
add 600 to 2
add 750 to 2
add 851 to 2
add 900 to 2
add 3560 to 2
add 3592 to 2
sec config completed
[Picon] adding path: /media/sda1/picon/
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.favorieten.tv 1
0 entries in Bouquet userbouquet.favorieten.tv
loading bouquet... /etc/enigma2/userbouquet.hr___ex_yu.tv 1
0 entries in Bouquet userbouquet.hr___ex_yu.tv
loading bouquet... /etc/enigma2/userbouquet.dbe79.tv 1
0 entries in Bouquet userbouquet.dbe79.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1
320 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 321
183 entries in Bouquet userbouquet.LastScanned.tv
loading bouquet... /etc/enigma2/userbouquet.gtss_______.tv 504
8 entries in Bouquet userbouquet.gtss_______.tv
loading bouquet... /etc/enigma2/userbouquet.shuratv_______.tv 512
135 entries in Bouquet userbouquet.shuratv_______.tv
loading bouquet... /etc/enigma2/userbouquet.comstar_direct_______.tv 647
0 entries in Bouquet userbouquet.comstar_direct_______.tv
loading bouquet... /etc/enigma2/userbouquet.75_0e_abs_1_ku_band________________________.tv 647
77 entries in Bouquet userbouquet.75_0e_abs_1_ku_band________________________.tv
loading bouquet... /etc/enigma2/userbouquet.tricolortv_______.tv 724
224 entries in Bouquet userbouquet.tricolortv_______.tv
loading bouquet... /etc/enigma2/userbouquet.orion_express_______.tv 948
173 entries in Bouquet userbouquet.orion_express_______.tv
11 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.ssr_srg.radio 1
0 entries in Bouquet userbouquet.ssr_srg.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 1
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Р*СѓСЃСЃРєРёР№
Renumbering...
[ePopen] command: ip -o addr show dev wlan0
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
[LCD] can't open /dev/dbox/fp0
setLCDBrightness 127
[LCD] can't open /dev/dbox/fp0
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
hotplug on dvi
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
==>> input video scan mode
3
==>> interlaced progressive algorithm
3
==>> updateAudioMode
OK
setMode - port: DVI mode: 1080p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[AutoMount.py] U/MOUNTCMD---> mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=guest,password= '//192.168.1.199/export/hdd' '/media/net/hdd'
[ePopen] command: mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=guest,password= '//192.168.1.199/export/hdd' '/media/net/hdd'
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /media/sda1
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
Plugin Extensions/Keymap_by_PingFlood failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/Keymap_by_PingFlood
loadSkin: Screen already defined elsewhere: Playlist
loadSkin: Screen already defined elsewhere: IPTVplayer
loadSkin: Screen already defined elsewhere: VODplayer
loadSkin: Screen already defined elsewhere: TasksScreen
loadSkin: Screen already defined elsewhere: SelectQuality
loadSkin: Screen already defined elsewhere: Plugin_menu
loadSkin: Screen already defined elsewhere: MainPrScreen
loadSkin: Screen already defined elsewhere: VirtualKeyBoardRUS_FIXED
-->126<----
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/cScVOD/cMRegular.otf...OK (cRegularIP)
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/cScVOD/cnmsbd.ttf...OK (cRegular)
No module named servicewebts
ERROR servicewebts STREAM *******************************************************
Creating Modul_kinoxa9x
Creating Modul_kinomaxpro
Creating Modul_smotriconcert
Creating Modul_youtubesearch
Creating Modul_m3u
Creating Modul_vkontaktesearch
Creating Modul_kino9live
Creating Modul_megogo
[MyTube] set language to ru
[MyTube] set language to ru
[MyTube] MyTubePlayerService - init
Media Center: Import VLC Stuff failed
[AutoBackup] fallback to default translation for Automatic settings backup
starting hotplug handler
wasTimerWakeup failed!
[CacheFlush] fallback to default translation for pagecache
Applying RSI Configuration Options
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
setValue 35
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
playing 1:0:19:4E89:14:70:1680000:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 64548 events read from /hdd/epg.dat
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0014:0070
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12130260 Pol 3 SR 27500000 INV 2 FEC 3 orbpos 360 system 1 modulation 2 pilot 2, rolloff 1
tuning to 1380 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4E89:14:70:1680000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep wlan0
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
poll: unhandled POLLERR/HUP/NVAL for fd 41(16)
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
mount: mounting //192.168.1.199/export/hdd on /media/net/hdd failed: Permission denied
32
[AutoMount.py] U/MOUNTCMD---> mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.199:/Harddisk' '/media/net/HarddiskAZBOXHD'
[ePopen] command: mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.199:/Harddisk' '/media/net/HarddiskAZBOXHD'
poll: unhandled POLLERR/HUP/NVAL for fd 48(17)
child has terminated
pipes closed
child has terminated
pipes closed
0.0.0.0
192.168
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8], [8, 8, 4, 4]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 199]}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:26:82:2c:5f:f7', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 199], 'up': True, 'mac': '00:02:14:14:40:fa', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount: RPC: Remote system error - Connection refused
mount: mounting 192.168.1.199:/Harddisk on /media/net/HarddiskAZBOXHD failed: Bad file descriptor
145
[AutoMount.py] U/MOUNTCMD---> mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.240:/export/hdd' '/media/net/vasiliy'
[ePopen] command: mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.240:/export/hdd' '/media/net/vasiliy'
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(17)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount: RPC: Remote system error - Connection refused
mount: mounting 192.168.1.240:/export/hdd on /media/net/vasiliy failed: Bad file descriptor
145
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x18c0478 running
[eEPGCache] channel 0x18c0478 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0131), and 1 audio stream(s) (019f), and the pcr pid is 0131, and the text pid is 01f9
allocate demux
[EPGC] next update in 2 sec
decoder state: play, vpid=305, apid=415
DMX_SET_PES_FILTER(0x131) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x19f) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x131) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1f9) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:19:4E89:14:70:1680000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4E89:14:70:1680000:0:0:0:
RemovePopup, id = ZapError
[SEC] sleep 500ms
VIDEO_GET_EVENT - ok
720
VIDEO_GET_EVENT - ok
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
PATready
use pmtpid 00cd for service_id 4e89
eventNewProgramInfo 0 0
have 1 video stream(s) (0131), and 2 audio stream(s) (0195, 019f), and the pcr pid is 0131, and the text pid is 01f9
decoder state: play, vpid=305, apid=415
[eDVBCIInterfaces] gotPMT
sdt update done!
[EPGC] start caching events(1411481048)
VIDEO_GET_EVENT - ok
1080
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1411481057)
[EPGC] schedule finished(1411481057)
[EPGC] stop caching events(1411481057)
[EPGC] next update in 60 min
[ePopen] command: ('sdparm', 'sdparm', '--flexible', '--readonly', '--command=stop', '/dev/sda')
child has terminated
pipes closed
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> InfobarShowHideActions toggleShow
action -> InfobarShowHideActions hide
action -> InfobarChannelSelection switchChannelDown
action -> OkCancelActions ok
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 1416, in channelSelected
TypeError: newZap() got an unexpected keyword argument 'preview_zap'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x18076c0>>,('OkCancelActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
<openpli>
<enigma2>
<crashdate>Втр Сен 23 18:05:07 2014</crashdate>
<compiledate>Sep 21 2013</compiledate>
<contactemail>forum at www.opensat4all.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2013-09-20</sourcedate>
<branch>(no branch)</branch>
<rev>2fe4ddc</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>premium</stbmodel>
<kernelversion>
<![CDATA[
Linux azboxhd 3.9.2-opensat #1 PREEMPT Wed Sep 18 18:38:26 CEST 2013 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>mem=107m console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openrsi 3.0 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
16352k video mem
- double buffering available!
9152kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7e2608 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Found 1 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 5201 services
scanning for frontends..
opening frontend 0
close frontend 0
boxtype detection via /proc/stb/info not possible... use fallback via demux count!
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 1
Use valid Linux Time
(RTC?)[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk hdb -> /dev/hdb -> /dev/hdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/hdb')
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
SKIN ERROR: {hd_glass16/skin.xml}: primary skin not found. Please contact the skin's author!
defaulting to standard skin... PLi-HD/skin.xml
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: advanced
add 90 to 2
add 100 to 2
add 130 to 2
add 160 to 2
add 192 to 2
add 215 to 2
add 235 to 2
add 255 to 2
add 282 to 2
add 315 to 2
add 360 to 1
add 390 to 2
add 420 to 2
add 530 to 2
add 600 to 2
add 750 to 2
add 851 to 2
add 900 to 2
add 3560 to 2
add 3592 to 2
sec config completed
[Picon] adding path: /media/sda1/picon/
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.favorieten.tv 1
0 entries in Bouquet userbouquet.favorieten.tv
loading bouquet... /etc/enigma2/userbouquet.hr___ex_yu.tv 1
0 entries in Bouquet userbouquet.hr___ex_yu.tv
loading bouquet... /etc/enigma2/userbouquet.dbe79.tv 1
0 entries in Bouquet userbouquet.dbe79.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1
320 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 321
183 entries in Bouquet userbouquet.LastScanned.tv
loading bouquet... /etc/enigma2/userbouquet.gtss_______.tv 504
8 entries in Bouquet userbouquet.gtss_______.tv
loading bouquet... /etc/enigma2/userbouquet.shuratv_______.tv 512
135 entries in Bouquet userbouquet.shuratv_______.tv
loading bouquet... /etc/enigma2/userbouquet.comstar_direct_______.tv 647
0 entries in Bouquet userbouquet.comstar_direct_______.tv
loading bouquet... /etc/enigma2/userbouquet.75_0e_abs_1_ku_band________________________.tv 647
77 entries in Bouquet userbouquet.75_0e_abs_1_ku_band________________________.tv
loading bouquet... /etc/enigma2/userbouquet.tricolortv_______.tv 724
224 entries in Bouquet userbouquet.tricolortv_______.tv
loading bouquet... /etc/enigma2/userbouquet.orion_express_______.tv 948
173 entries in Bouquet userbouquet.orion_express_______.tv
11 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.ssr_srg.radio 1
0 entries in Bouquet userbouquet.ssr_srg.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 1
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
[SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Р*СѓСЃСЃРєРёР№
Renumbering...
[ePopen] command: ip -o addr show dev wlan0
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
[LCD] can't open /dev/dbox/fp0
setLCDBrightness 127
[LCD] can't open /dev/dbox/fp0
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
hotplug on dvi
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
==>> input video scan mode
3
==>> interlaced progressive algorithm
3
==>> updateAudioMode
OK
setMode - port: DVI mode: 1080p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[AutoMount.py] U/MOUNTCMD---> mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=guest,password= '//192.168.1.199/export/hdd' '/media/net/hdd'
[ePopen] command: mount -t cifs -o rw,noatime,noserverino,iocharset=utf8,username=guest,password= '//192.168.1.199/export/hdd' '/media/net/hdd'
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[Ipkg] Added to OPKG destinations: /media/hdd
[Ipkg] Added to OPKG destinations: /media/sda1
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
Plugin Extensions/Keymap_by_PingFlood failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/Keymap_by_PingFlood
loadSkin: Screen already defined elsewhere: Playlist
loadSkin: Screen already defined elsewhere: IPTVplayer
loadSkin: Screen already defined elsewhere: VODplayer
loadSkin: Screen already defined elsewhere: TasksScreen
loadSkin: Screen already defined elsewhere: SelectQuality
loadSkin: Screen already defined elsewhere: Plugin_menu
loadSkin: Screen already defined elsewhere: MainPrScreen
loadSkin: Screen already defined elsewhere: VirtualKeyBoardRUS_FIXED
-->126<----
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/cScVOD/cMRegular.otf...OK (cRegularIP)
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/cScVOD/cnmsbd.ttf...OK (cRegular)
No module named servicewebts
ERROR servicewebts STREAM *******************************************************
Creating Modul_kinoxa9x
Creating Modul_kinomaxpro
Creating Modul_smotriconcert
Creating Modul_youtubesearch
Creating Modul_m3u
Creating Modul_vkontaktesearch
Creating Modul_kino9live
Creating Modul_megogo
[MyTube] set language to ru
[MyTube] set language to ru
[MyTube] MyTubePlayerService - init
Media Center: Import VLC Stuff failed
[AutoBackup] fallback to default translation for Automatic settings backup
starting hotplug handler
wasTimerWakeup failed!
[CacheFlush] fallback to default translation for pagecache
Applying RSI Configuration Options
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
setValue 35
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
playing 1:0:19:4E89:14:70:1680000:0:0:0:
main thread is non-idle! display spinner!
[EPGC] 64548 events read from /hdd/epg.dat
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0014:0070
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12130260 Pol 3 SR 27500000 INV 2 FEC 3 orbpos 360 system 1 modulation 2 pilot 2, rolloff 1
tuning to 1380 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4E89:14:70:1680000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep wlan0
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
poll: unhandled POLLERR/HUP/NVAL for fd 41(16)
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
mount: mounting //192.168.1.199/export/hdd on /media/net/hdd failed: Permission denied
32
[AutoMount.py] U/MOUNTCMD---> mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.199:/Harddisk' '/media/net/HarddiskAZBOXHD'
[ePopen] command: mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.199:/Harddisk' '/media/net/HarddiskAZBOXHD'
poll: unhandled POLLERR/HUP/NVAL for fd 48(17)
child has terminated
pipes closed
child has terminated
pipes closed
0.0.0.0
192.168
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8], [8, 8, 4, 4]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 199]}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:26:82:2c:5f:f7', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 199], 'up': True, 'mac': '00:02:14:14:40:fa', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount: RPC: Remote system error - Connection refused
mount: mounting 192.168.1.199:/Harddisk on /media/net/HarddiskAZBOXHD failed: Bad file descriptor
145
[AutoMount.py] U/MOUNTCMD---> mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.240:/export/hdd' '/media/net/vasiliy'
[ePopen] command: mount -t nfs -o tcp,noatime,rw,nolock,soft '192.168.1.240:/export/hdd' '/media/net/vasiliy'
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(17)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
child has terminated
pipes closed
[AutoMount.py] CheckMountPointFinished mount: RPC: Remote system error - Connection refused
mount: mounting 192.168.1.240:/export/hdd on /media/net/vasiliy failed: Bad file descriptor
145
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x18c0478 running
[eEPGCache] channel 0x18c0478 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0131), and 1 audio stream(s) (019f), and the pcr pid is 0131, and the text pid is 01f9
allocate demux
[EPGC] next update in 2 sec
decoder state: play, vpid=305, apid=415
DMX_SET_PES_FILTER(0x131) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x19f) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x131) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1f9) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:19:4E89:14:70:1680000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:4E89:14:70:1680000:0:0:0:
RemovePopup, id = ZapError
[SEC] sleep 500ms
VIDEO_GET_EVENT - ok
720
VIDEO_GET_EVENT - ok
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
PATready
use pmtpid 00cd for service_id 4e89
eventNewProgramInfo 0 0
have 1 video stream(s) (0131), and 2 audio stream(s) (0195, 019f), and the pcr pid is 0131, and the text pid is 01f9
decoder state: play, vpid=305, apid=415
[eDVBCIInterfaces] gotPMT
sdt update done!
[EPGC] start caching events(1411481048)
VIDEO_GET_EVENT - ok
1080
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1411481057)
[EPGC] schedule finished(1411481057)
[EPGC] stop caching events(1411481057)
[EPGC] next update in 60 min
[ePopen] command: ('sdparm', 'sdparm', '--flexible', '--readonly', '--command=stop', '/dev/sda')
child has terminated
pipes closed
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> InfobarShowHideActions toggleShow
action -> InfobarShowHideActions hide
action -> InfobarChannelSelection switchChannelDown
action -> OkCancelActions ok
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 1416, in channelSelected
TypeError: newZap() got an unexpected keyword argument 'preview_zap'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x18076c0>>,('OkCancelActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>