мой хапер что случилось с 9500
--------------------------------------------------------------------------------
========================================
Samsung Brand 5512 Model
Dual CI
VIACCESS
HW version 5.04
Loader version 5.01
========================================
Select Download
Timeout
Reboot
LI)=Ok
STAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
STEVT_Init()=Ok
STPWM_Init()=Ok
STCLKRV_Init(CLKRV0)=Ok
Demodulator OK!
PTI_Init()=Ok
STCLKRV_Open(CLKRV0)=Ok
declared symbols = 0 (0 commands + 0 macros + 0 strings + 0 numbers)
allocated symbols = 0 / 0
free memory size = 800000 bytes
STAUD_Init(AUD0)=Ok
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
>>>>>>>>>>>>>>>>>>START TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>END TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<
STTTX_Init(TTX)=Ok
STAUD_Open(AUD0)=Ok
STVTG_Open(VTG0)=Ok
STVID_Open(VID0)=Ok
5512STDENC_Init : Done
STDENC_Open, Device 'DENC0' Opened
__________________________________________________ _______________--
подскажить что сдохло
5512STDENC_SetEncodingMode : Done
STVTG_SetMode()=Ok
Mode 576,50,27000
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Ok
Device 'OSD0' initialisedSTVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate
50)=Ok
OSD: Region creation . . . passed
OSD Region: W=720, H=576, X=0, Y=0
OSD: top_address = C00D8508, top_address_tail = C010AF08
OSD: bot_address = C010B408, bot_address_tail = C013DE08
OSD: set draw region addresses . . . passed
passed
uncompress font20 data ...
uncompress font24 data ...
uncompress font16 data ...
- fonts compact -> ON
- fonts gzip -> ON
OSD: Initialized
STDENC_EnableVideo : DoneError STOSD_GetScreenParams Ok
Error STVID_GetScreenPaOk
Mode 576,50,27000
[TEST_CYRUS] Register couple functions for test of 'boot-main cross'
DEVELOP_InitCommand() : macros registrations ok
[CA_GLUE]CAS MODEL:00000021
[SCPRIM](2)CARD NO: [VIA_detect_monitor]:smart card detect monitor task started.
..
[VIA_monitor_init_sc]smart card init monitor task started...
[CONAX_detect_monitor]:smart card detect monitor task started...
0[CONAX_monitor_init_sc]smart card init monitor task started...
[SMART-MAN] CONTEXT: c0778db8, dl:1, il:7
[T0]!!!!!INSTALL INTERUPT!!!!!
ADRESS: 20008000,handle:0xc0778db8
CPU FREQUENCY:60000000,8 SCARD FREQUENCY:3571400,WI:16250,SCCLKCON:2
[SCPRIM](2)CARD NO: 0
[SMART-MAN] CONTEXT: c07784b8, dl:2, il:7
[T0]!!!!!INSTALL INTERUPT!!!!!
ADRESS: 20007000,handle:0xc07784b8
CPU FREQUENCY:60000000,8 SCARD FREQUENCY:3571400,WI:16250,SCCLKCON:2
[SMART_MAN] INIT TASK RECOGNIZER
[T0]smart card i/o monitor task started...
[SMART-MAN] TASK_scard_recognizer
[SMART-MAN] Slot 0 empty or STB on standby mode!!!
[SMART-MAN] Slot 1 empty or STB on standby mode!!!
VIACCESS ERR MISC STB_release_semaphore() failed, handle 0 arledy released
STB_card_related_messages 2
__________________ no card in slot _________________
VIACCESS ERR MISC STB_release_semaphore() failed, handle 0 arledy released
STB_card_related_messages 2
__________________ no card in slot _________________
Viaccess version 100.v412 compiled on Aug 11 1999:18:04:31
[CA_GLUE] VIACCESS has just initialized as 0 cas system.
CONAX INF MISC co_init() reported SUCCES
[CA_GLUE] CONAX has just initialized as 2 cas system.
[CA_GLUE] CI has just initialized as 3 cas system ().
CI PHYSICAL PCMCIA module reset - quit from standby. Slot_ID: 0
[MAIN]Init softupdate-monitor - succesfull.
BGCAT opening...
BGCAT: background_cat_base = c045a520!
...BGCAT opened.
PAT opening...
PAT: pat_base = c0459310!
...PAT opened.
SDT opening...
SDT: circular_buffer_base = c04582f0!
SDT: circular_buffer_size = 1000!
...SDT opened.
SDT: circular_buffer_base = c04572e0!
SDT: circular_buffer_size = 1000!
NIT opening...
NIT: background_nit_base = c0455c40!
...NIT opened.
TDT opening...
TDT: background_sdt_base = c0a30!
...TDT opened.
EIT opening...
EIT: eit_base = c044ca10 size = 8000!
...EIT opened.
BGTAB opening...
BGTAB: background_cat_base = c044b800!
...BGTAB opened.
SCRDET opening...
...SCRDET opened.
CHCHANGE opening...
...CHCHANGE opened.
TIME opening...
...TIME opened.
usif process created successfully
TTXT : ttx_vbi_stop
HIT ESC TO ENTER TESTTOOL
мой хапер что случилось с 9500
--------------------------------------------------------------------------------
========================================
Samsung Brand 5512 Model
Dual CI
VIACCESS
HW version 5.04
Loader version 5.01
========================================
Select Download
Timeout
Reboot
LI)=Ok
STAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
STEVT_Init()=Ok
STPWM_Init()=Ok
STCLKRV_Init(CLKRV0)=Ok
Demodulator OK!
PTI_Init()=Ok
STCLKRV_Open(CLKRV0)=Ok
declared symbols = 0 (0 commands + 0 macros + 0 strings + 0 numbers)
allocated symbols = 0 / 0
free memory size = 800000 bytes
STAUD_Init(AUD0)=Ok
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
>>>>>>>>>>>>>>>>>>START TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>END TELETEXT INIT<<<<<<<<<<<<<<<<<<<<<<
STTTX_Init(TTX)=Ok
STAUD_Open(AUD0)=Ok
STVTG_Open(VTG0)=Ok
STVID_Open(VID0)=Ok
5512STDENC_Init : Done
STDENC_Open, Device 'DENC0' Opened
__________________________________________________ _______________--
подскажить что сдохло
5512STDENC_SetEncodingMode : Done
STVTG_SetMode()=Ok
Mode 576,50,27000
STVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate 50)=Ok
Device 'OSD0' initialisedSTVTG_GetMode(Active XYWH 132,23,720,576 Scan 2, FRate
50)=Ok
OSD: Region creation . . . passed
OSD Region: W=720, H=576, X=0, Y=0
OSD: top_address = C00D8508, top_address_tail = C010AF08
OSD: bot_address = C010B408, bot_address_tail = C013DE08
OSD: set draw region addresses . . . passed
passed
uncompress font20 data ...
uncompress font24 data ...
uncompress font16 data ...
- fonts compact -> ON
- fonts gzip -> ON
OSD: Initialized
STDENC_EnableVideo : DoneError STOSD_GetScreenParams Ok
Error STVID_GetScreenPaOk
Mode 576,50,27000
[TEST_CYRUS] Register couple functions for test of 'boot-main cross'
DEVELOP_InitCommand() : macros registrations ok
[CA_GLUE]CAS MODEL:00000021
[SCPRIM](2)CARD NO: [VIA_detect_monitor]:smart card detect monitor task started.
..
[VIA_monitor_init_sc]smart card init monitor task started...
[CONAX_detect_monitor]:smart card detect monitor task started...
0[CONAX_monitor_init_sc]smart card init monitor task started...
[SMART-MAN] CONTEXT: c0778db8, dl:1, il:7
[T0]!!!!!INSTALL INTERUPT!!!!!
ADRESS: 20008000,handle:0xc0778db8
CPU FREQUENCY:60000000,8 SCARD FREQUENCY:3571400,WI:16250,SCCLKCON:2
[SCPRIM](2)CARD NO: 0
[SMART-MAN] CONTEXT: c07784b8, dl:2, il:7
[T0]!!!!!INSTALL INTERUPT!!!!!
ADRESS: 20007000,handle:0xc07784b8
CPU FREQUENCY:60000000,8 SCARD FREQUENCY:3571400,WI:16250,SCCLKCON:2
[SMART_MAN] INIT TASK RECOGNIZER
[T0]smart card i/o monitor task started...
[SMART-MAN] TASK_scard_recognizer
[SMART-MAN] Slot 0 empty or STB on standby mode!!!
[SMART-MAN] Slot 1 empty or STB on standby mode!!!
VIACCESS ERR MISC STB_release_semaphore() failed, handle 0 arledy released
STB_card_related_messages 2
__________________ no card in slot _________________
VIACCESS ERR MISC STB_release_semaphore() failed, handle 0 arledy released
STB_card_related_messages 2
__________________ no card in slot _________________
Viaccess version 100.v412 compiled on Aug 11 1999:18:04:31
[CA_GLUE] VIACCESS has just initialized as 0 cas system.
CONAX INF MISC co_init() reported SUCCES
[CA_GLUE] CONAX has just initialized as 2 cas system.
[CA_GLUE] CI has just initialized as 3 cas system ().
CI PHYSICAL PCMCIA module reset - quit from standby. Slot_ID: 0
[MAIN]Init softupdate-monitor - succesfull.
BGCAT opening...
BGCAT: background_cat_base = c045a520!
...BGCAT opened.
PAT opening...
PAT: pat_base = c0459310!
...PAT opened.
SDT opening...
SDT: circular_buffer_base = c04582f0!
SDT: circular_buffer_size = 1000!
...SDT opened.
SDT: circular_buffer_base = c04572e0!
SDT: circular_buffer_size = 1000!
NIT opening...
NIT: background_nit_base = c0455c40!
...NIT opened.
TDT opening...
TDT: background_sdt_base = c0a30!
...TDT opened.
EIT opening...
EIT: eit_base = c044ca10 size = 8000!
...EIT opened.
BGTAB opening...
BGTAB: background_cat_base = c044b800!
...BGTAB opened.
SCRDET opening...
...SCRDET opened.
CHCHANGE opening...
...CHCHANGE opened.
TIME opening...
...TIME opened.
usif process created successfully
TTXT : ttx_vbi_stop
HIT ESC TO ENTER TESTTOOL
мой хапер что случилось с 9500
