А кто в курсе что это такое??
Фейк не фейк??
ufs910NPprof.1.fullimage.kathrein
Viel SpaĂź damit.
KATHREIN - UFS - 910 NON - PUBLIC - IMAGE NPprof.1!
NON - PUBLIC - IMAGE FĂśR KATHREIN UFS - 910 SAT - RECEIVER!
Dies ist nicht eine offizielle Software des Herstellers!
Nur fĂĽr private Tests und Experimente zur Erweiterung der Funktionen von Ihrem Receiver!
NO ILLEGAL STUFF INCLUDED! Keine Plugins enthalten!
Have fun.
KATHREIN-UFS-910 NON-PUBLIC-IMAGE NPprof.1!
THIS IS A NON-PUBLIC-IMAGE FOR KATHREIN UFS-910 SAT-RECEIVER!!!
THIS IS NOT AN OFFICIAL RELEASE FROM THE MANUFACTOR!!
ONLY FOR PRIVATE TESTING AND EXPERIMENTALS TO EXPAND THE FEATURES OF YOUR RECEIVER!!!
NO ILLEGAL STUFF INCLUDED!!! NO PLUGINS INCLUDED!
NO WARRANTY IF YOUR UFS910 WILL BE DAMAGED BY THIS SOFTWARE, WRONG FLASHING OR USING!
TAKE CARE THAT YOUR MANUCATOR-WARRANTY WILL BE GONE IF YOU INSTALL A DIFFERENT SOFTWARE THAN THE ORIGINAL!!!
features:
- root+app+kernel(s-ata+pl2303 support)+emergency images are squashfs-filesystem
- data+config images are jfss2-filesystem
- autom. addon-install (if there's an *.tar.bz2 in /data/update)
- record via RC + telnet (experiment., working by RC+telnet, recorded files not playable on ufs910 only on pc!
(see record-instructions for details!)
- emu restart via RC (only on old ufs910 >1w, see /data/etc/lircrc for details)
- switches to start/stop addons (see /data/etc .* for details, delete .*name to start on boot)
- key-update on boot if needed (also manual, via RC or telnet, see /data/etc for details)
- vfdctl (display messages after boot on ufs910-display)
- dspl (display messages on boot at ufs910-display, needed for addon autom. install on boot)
- web-interface (experimentell, some features are under construction, some features working)
- sata-hdd support (experiment. but working by manual mount via telnet)
- busybox 1.7.3 (new features, but some bugs f.e. after boot textcolor same as backgroundcolour!)
- midnight commander
- vsftpd
- dns-support
- gateway-support
- portmap-support
no sshd-support sorry (gone to get the space for other stuff)!
image structure:
folder app:
/app/start.sh (starts the image, no start.sh in /config!)
folder etc:
/etc/rcs.d/S210loadmodules (load vfd-driver first to display text on addon-update)
/etc/rcs.d/S220extract (starts addon-update on boot if there's a *.tar.bz2 in /data/update)
/etc/rcs.d/S350httpd (starts httpd for web-interface-support)
folder data:
/data/config/ipconfig (setting up your networkconnections like: UFS910-IP,GW,DNS etc.)
/data/config/*.dat + *.cfg (channel-settings! please save your settings to put it back after flashen for use you own settings)
/data/etc (for bootconfig, addon-config (only dummy-files included), RC-start/stop/restart/update-config)
/data/emu (for emu-binarys, not included!!!)
/data/keys (for keys, only dummy-files included!!!)
/data/plugins (for plugins i.e. osd_call, web-if)
/data/update (for addon-updates, i.e. addon.tar.bz2, put it there, reboot, addon will be installed!)
/data/lib (not present at this time but in the future with new addons!)
install instructions:
if you have a image on ufs910 except sf-team-images 10/07...
ONLY flash:
kernel.img
root.img
app.img
dat.img
config.img only ipconfig incl. NO Channelsetting!)*
if you have sf-team-image installed with changed emergency...
COMPLETE-flash:
emerg.img
kernel.img
root.img
app.img
data.img ***
config.img * **
*not nessecary if your're able to create a file called "ipconfig" in /config with a unix-editor, chmod 755,
with content( example-conf in config.img but NO channel-settings!!):
#ufs910ip
IP 192.168.0.20
#netmask
NM 255.255.255.0
#dns-server
DNS 192.168.0.1
#gateway
GW 192.168.0.1
#portmapping
#PORTMAP 192.168.0.20
#spinup USB/ESATA Storage experimentell
#MP /mnt/nfs
** also save your channel-settings first BEFORE flashing config.img to put it back after flashing! NO CHANNEL-SETTINGS-INCLUDED!
*** if you have emu-binarys/config/settings save them BEFORE flashing data.img to put it back after flashing!
to get access to ufs910 after flashing, change the ufs910ip via seriall-connection, or change your pc/router-settings!
record-instructions:
- choose your channel you want to record
option #1:
use "rec-button" on your RC to start recording
use "stop-button" on RC to stop recording (maybe didn't work sometimes, in this case reboot your ufs910 to stop recording)
option #2:
- login to ufs910 via telnet
- mount -t vfat /dev/sda1 /mnt/nfs (1 can be different for sata- or usb-hdd, usb-sticks are to slow for recording!!!)
- /bin/record /mnt/nfs/filename.ts
- to stop recording STRG-C / CTRL-C
(record couldnt be terminated correctly atm, you have to shutdown the box and startup again for doing another record)
records are only playable on pc with patched "mplayer" on windows (you can get them on:
http://www.megaupload.com/de/?d=8C8S601O)
at this time only fta-recording is possible (or try it, maybe it works)
at the moment files bigger than ~20MB couldn´t be transferrerd via FTP
so you have to disconnect the HDD from ufs910 and connect it to your pc.
other way is to record to a nfs writable shared folder on your pc (i.e. c:\movies)
via telnet:
mount ip-of-your-pc:/c/movies /mnt/nfs
/bin/record /mnt/nfs/filename.ts
additionals:
maybe in future are addon-updates available f.e.: emu, callmon etc.
Keine Garantie, wenn Ihr UFS910 durch diese Software beschädigt oder gar zerstört wird!
Achten Sie darauf, dass Ihre Hersteller - Garantie erlischt, wenn Sie eine andere Software installieren als das Original!
Features:
- root+app+kernel(sata+pl2303 support)+emergency images squashfs-filesystem
- data+config images jfss2-filesystem
- Automat. Addon install (wenn ein *. tar.bz2 in /data/update vorhanden)
- record ĂĽber RC + Telnet (experiment., die von RC + Telnet, aufgenommen Dateien sind nicht abspielbar auf ufs910 nur auf PC!
(Siehe record - Anweisungen fĂĽr Details!)
- Emu neu ĂĽber RC (nur auf alten ufs910> 1w, siehe /data/etc/lircrc fĂĽr Details)
- Schaltet auf Start / Stop Addons (siehe /data/etc. .* für Details, (z.b.löschen von .cmad3 startet beim Booten camd3)
Taste - Update auf booten, wenn dies notwendig ist (auch manuell ĂĽber RC oder Telnet, siehe / Daten / etc Einzelheiten)
- Vfdctl (Anzeige von Nachrichten nach dem Booten auf ufs910 - Anzeige)
- Dspl (Anzeige von Nachrichten bei boot im ufs910 Display, die fĂĽr Addon automat. Installation erforderlich sind)
- Weboberfläche (experimentell, einige Funktionen befinden sich im Aufbau, einige Funktionen arbeiten)
- Sata - Festplatte (experiment. einhängen nur durch manuelles mounten per Telnet)
- "Busybox 1.7.3 (neue Funktionen, aber einige Bugs z.B. nach dem Booten Textfarbe wie backgroundcolour!)
- MC
- vsftpd
- DNS - UnterstĂĽtzung
- Gateway - UnterstĂĽtzung
- Portmap-Dienst - UnterstĂĽtzung
- sshd weggefallen (um Platz fĂĽr andere wichtigere Dinge zu schaffen)!
image Struktur:
Ordner app:
/app/start.sh (keine start.sh in /config vorhanden!)
Ordner etc.:
/ Etc/rcs.d/S210loadmodules (Last vfd - Treiber ersten Anzeigentext (Addon - Update))
/ Etc/rcs.d/S220extract (Addon-Installation - Update beim booten, wenn es eine *. tar.bz2 in /data/update gibt)
/ Etc/rcs.d/S350httpd (httpd fĂĽr das Web - Interface - UnterstĂĽtzung)
Ordner data:
/ data/config/ipconfig (Einrichtung Ihrer networkconnections wie: UFS910 - IP, GW, DNS usw.)
/ data/config/*. dat. + *. cfg- (Kanal - Einstellungen! Bitte speichern Sie Ihre Einstellungen, um sie zurĂĽckzuflashen fĂĽr eigene Einstellungen)
/data/etc. (fĂĽr bootconfig, Addon Konfiguration (nur Dummy - Dateien enthalten), RC-start/stop/restart/update-config)
/data/emu (fĂĽr Emu - binarys, nicht im Lieferumfang enthalten!)
/data/keys (fĂĽr SchlĂĽssel, nur Dummy - Dateien enthalten!)
/data/plugins (fĂĽr die Plugins... osd_call, Web-if...)
/ata/update (Addon-Ordner fĂĽr Updates, *addon.tar.bz2 enthalten dann nach Reboot Autoinstallation!)
/data/lib (in der Zukunft lib-Ordner fĂĽr neue Addons!)
Installation:
Wenn Sie ein Image auf ufs910 AUSSER -sf - Team - image 10/07 haben...
NUR flashen:
Kernel.img
root.img
App.img
Dat.img
Config.img (nur ipconfig inkl.. KEINE Channelsettings!) *
Wenn Sie -sf - Team - mit geändertem emergency (10/07) haben...
complete flash:
Emerg.img
Kernel.img
root.img
App.img
Data.img ***
Config.img * **
* Nicht notwendig, wenn Sie in der Lage sind, eine Datei mit dem Namen "ipconfig" in / config mit ein Unix Editor, chmod 755, zu erstellen mit dem Inhalt (Beispiel Konfiguration im config.img!):
# Ufs910ip
IP 192.168.0.20
# Netzmaske
NM 255.255.255.0
# DNS Server
DNS 192.168.0.1
# Gateway
GW 192.168.0.1
# Portmapping
# PORTMAP 192.168.0.20
# Spinup USB / ESATA Storage experimentell
# MP / mnt / nfs-common
** Auch speichern Sie Ihre Channelsetting bevor Sie config.img flashen! NO CHANNEL - EINSTELLUNGEN - INKLUSIVE! um diese anschliessend zurĂĽckzu kopieren!
***emu-binarys/config/settings speichern bevor Sie data.img flashen um diese anschliessend zurĂĽckzukopieren!
Erhalten Sie keinen Zugang zu ufs910 nach flashen, ändern Sie die ufs910-ip über seriall - Anschluß, oder ändern Sie Ihre Computer / Router - Einstellungen!
record - Anweisungen:
- Wählen Sie den Sender, den Sie aufnehmen möchten
- max. filegrösse 4gb kein splitting (also max. ca. 60min.)
Option # 1:
"Rec Taste" per RC um die Aufnahme zu starten
"Stopp-Taste" auf RC um die Aufnahme zu beenden (funktioniert meis nie! in diesem Fall einen Neustart Ihres ufs910 durchfĂĽhren um die Aufnahme zu beenden)
Option # 2:
- Einloggen, auf ufs910 per Telnet
- mount -t vfat /dev/sda1 /mnt/nfs (1 kann sich für sata oder usb-hdd ändern. usb-sticks evtl. zu langsam für die Aufnahme!)
- /bin/record /mnt/nfs/filename.ts
- to stop recording STRG-C / CTRL-C
(stoppt nur aufnahme, ein erneutes aufnehmen ohne reboot nicht möglich! evtl. systemabsturz!)
Datensätze sind nur spielbar auf PC mit gepatchten "MPlayer" unter windows (bekomm man auf:
http://www.megaupload.com/de/?d=8C8S601O)
Dateien größer als ~ 20MB können nicht transferriert werden über FTP
Sie mĂĽssen also die HDD trennen von ufs910 und verbinden Sie mit Ihrem PC.
Andere Möglichkeit ist, streamen zu einem nfs beschreibbaren, freigegebenen Ordner auf Ihrem PC (zB c: \ Filme)
Per Telnet:
mount ip-of-your-pc:/c/movies /mnt/nfs
/bin/record /mnt/nfs/filename.ts
Zusätze:
Vielleicht in der Zukunft sind Addon Updates verfĂĽgbar zB: Emu, callmon usw.
Ende Readme-Datei
http://www.upload.dvhk.pl/content.php?id=87597