вот присланный лог
MIU0_OK
MIU1_OK
BOOT_MXoPk[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'pcnet_eth0'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x80351ef8)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x80351ac0)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
[MAD_ERROR][000351] Mutex taking timeout
[SCL_INFO] TNR (BufStart, BufEnd)= (0x03ab0000, 0x04000000)
_TNR_Select_Path ==> SCALER_TNR_PIN_POUT
-----VE: u16In_FR = 2500
-----VE: u16Out_FR = 2500
-----VE: bDouble = 0
-----VE: FRC is not necessary
[MDrv_MAD_Dvb_SetInternalMemInfo], DEC BASE:0x Dsp code verify ok!!
Dsp code verify ok!!
MDrv_MAD_AuAlgLoadCode[mpeg] finishedMDrv_MAD_AuSetNormalPath(0x0, 0x0, 0x0) Dsp code verify ok!!
Dsp code verify ok!!
Dsp code verify ok!!
MDrv_MAD_AuSetNormalPath(0x3, 0x0, 0x4)MDrv_AuSe_SetMemInfo[0x37B0000]
AuCodecLoadCode() CM addr: 0x0 CM buf addr: 0x80334F92 CM size: 0x2064 Dsp code verify ok!!
Dsp code verify ok!!
Dsp code verify ok!!
MApi_AUTH_Process
Auth OK
[SVD] Set Black Luma Addr = 0x1500000, 0x9500000, 0x8000000
[SVD] Set Black Chroma Addr = 0x16fe000, 0x96fe000, 0x8000000
MDrv_HDMITx_Init
MApi_HDMITx_SetAudioFrequencyFromMad()::Sampling Rate=44 K
-----VE: u16In_FR = 2500
-----VE: u16Out_FR = 2500
-----VE: bDouble = 0
-----VE: FRC is not necessary
MDrv_HDMITx_Exhibit: Create Check Rx timer success!
============== TSP Firmware download start ================
(Fw_addr, Fw_Size)= (0x800005c0, 0x00004400)
============== TSP Firmware download stop ================
Usb init
Usb start..
usbtask
Usb init
Usb port2 start..
usbtask 2
_TNR_Select_Path ==> SCALER_TNR_PIN_POUT
[+]MDrv_CofdmDmd_Init
---> Hw Rest for DEMOD
------ A2108_Initialize -------Booted !
A2108_EC_OK !
[-]MDrv_CofdmDmd_Init
* Run _FONT_DeCompressFont (1) *
* Run _FONT_DeCompressFont (1) *
MApi_VectorFont_Init total size=5242880, free size=4794832, large size=4794820
MApi_DigiTuner_Init
decode u32compressnum = 0x202ea
decodesize = 0x100000
[0] [0]
[1] [0]
[2] [0]
[3] [0]
[4] [0]
[5] [0]
[6] [0]
[7] [0]
[8] [0]
[9] [0]
[10] [0]
[11] [0]
[12] [0]
[13] [0]
[14] [0]
decode u32compressnum = 0x202ea
decodesize = 0x100000
-----VE: u16In_FR = 2500
-----VE: u16Out_FR = 2500
-----VE: bDouble = 0
-----VE: FRC is not necessary
CmdData[2] = 0x38
CmdData[3] = 0xFC u32TunerFreq = 1294 u32SymbolRate = 44951000
========================
App:CL216251
Lib:CL213619
========================
---SI Monitor Scan Parser start