Выложил прошивку в файловый архив. Здесь полный список изменений, можем обсудить, что из этих нововведений полезно, и как можно использовать.
Changes :
1. Infobar FULL Display fix. (1x Info Button)
2. NEW PVR Function add. :
а. During Recording channels from same TP in OK CH.List in same colour to accent
б.Ch. switching during Recording :
--> Go to the channel which you want to watch
--> Press REC Button, select channel from TP list
--> OK Button - CH.List --> Ch. switching from channels in same Transponder
3. PVR Power Control Manager fix. - Default ON fix.
а. HDD Standby Time HDD dependet , arround 5- 15 min .
б. Playback - Button activated :
--> Remote Control NEW : Button down Right
--> Remote Control OLD : Green Button
4. Lond File name Download/Update bug via USB fix.
а. Also Download/Update from Subfolder possible
б. .kdb, .key and other fiel formats with long file name
5. EPG 7 Day Mode - Week-Line improved for German and Turkish OSD Language
6. USB Menu : INFO Button - Create UDB --> POPUP Window bug fix.
7. When you download through USB, was problem downloading problem. It's solved
8. Signal bug by Ch.switch fix.
9. DiseqC protocoll improved
10. Teletext improvements :
а. Monitoring bug fix. for div. Languages
б. Page Save Function improved
в. Div. Language packages update
11. EPG improvements for div. Language packages
12. Subtitle improvements for div. Language packages
13. CAM Modul + MCAS SmartCard Reader driver update
Advice :
14. Display bright Status : Menu - Module - Cas Menu - RS232 Com Port - NONE
15. Display dark Status : Menu - Module - CAS Menu - RS232 Com Port - Gbox, Homeshare, HSIC, Xcrypt
AU update still works ;-)
Добавлено через 25 минут
Рыл-рыл, так и не понял, что такое функция "Пилот"? Что она делает?
Если очень заумно, то примерно так:
....When ACM systems are considered, pilot symbols can be inserted in the physical layer frame structure for carrier synchronization and channel estimation purposes. In fact, phase recovery for 8PSK and higher modulation orders with the specified phase noise appears very difficult without any pilot. Besides, in ACM system, the key issue is that the receiver is in general able to decode only a part of the entire stream, and precisely only the frames where transmission parameters are compatible with user channel conditions. In this context, pilot symbols both allow for carrier recovery without knowledge of the frame data and prevent the need for frame re-acquisition when the current frame data are not correctly decoded. Pilot symbol insertion in DVB-S2 signal is optional, but pilot switching on a frame-by-frame basis is not permitted....
Если по простому - функция Пилот позволяет лучше раскодировать сигнал. Pilot обычно включается при приеме сигнала, модулированного 8PSK.